回到顶部
/content/maximintegrated/zh/applications/aerospace-defense/dscc-smd-devices

DSCC-SMD Devices

Analog ICs provide complete analog circuit functions.

MAXM17625EVKIT Evaluation Kit for the MAXM17625/MAXM17626 Modules in Application

The MAXM17625/MAXM17626 evaluation kits (EV kits) provide a proven design to evaluate the perfor...
  • Operates up to 5.5V Input Supply
  • MAXM17625 Offers High 92% Efficiency (VIN = 3.3V, VOUT = 1.5V, IOUT = 300mA)
  • MAXM17626 Offers High 94.5% Efficiency (VIN = 5V, VOUT = 3.3V, IOUT = 400mA)
  • Up to 600mA Load Current
  • 2MHz Fixed Switching Frequency for the MAXM17625
  • 4MHz Fixed Switching Frequency for the MAXM17626
  • Selectable Pulse-Width Modulation (PWM) and Pulse-Frequency Modulation (PFM) Modes of Operation
  • Internal 1ms Soft-Start Time
  • Power-Good (PGOOD) Output with Pullup Resistor to Respective Input Voltages
  • Low-Profile, Surface-Mount Components
  • Proven PCB Layout
  • Fully Assembled and Tested

MAXQ1065 Ultra Low-Power Cryptographic Controller with ChipDNATM for Embedded Devices

The MAXQ1065 is a security coprocessor that provides turnkey cryptographic functions for root-of...
  • ECC Compute Engine Using Curve NIST P-256
    • FIPS-186 ECDSA
    • NIST SP800-56Ar3 Key Exchange with Static Unified Model, C(0e, 2s, ECC CDH) with One-Step Key Derivation Using SHA-256
    • On-Board EC Key Generation with SP800-90B/A
  • SHA-2 Compute Engine
    • NIST FIPS-180-4 SHA2-256, HMAC-SHA-256
  • AES Compute Engine with 128 and 256 Key Sizes
    • ECB, CBC, CCM, GCM Cipher Modes
    • CBC-MAC, CMAC Message Authentication Codes
    • Onboard AES Key Generation with SP800-90A/B
  • True Random Number Generator (TRNG)
    • NIST SP800-90A/C Compliant
    • NIST SP800-90B Entropy Source
  • Secure Communication
    • TLS/DTLS 1.2 Handshake and Record Layer
      • ECDSA Authentication
      • ECDHE Key Exchange
      • AES-GCM or CCM Record Layer
    • SP800-56Ar3-Based Key Exchange
  • X.509 v3 Certificate Support
    • Storage of Root and Device Certificates
    • Onboard Verification of Chains of Certificates
    • ECDSA Verification on Supported Curves
  • High-Speed Interface for Host Microcontroller Communication
    • 10MHz SPI with Mode 0 or Mode 3 Operation
  • 8KB User Flash Array with ChipDNA PUF Encryption
  • Unique, Unalterable Factory-Programmed ID Number
  • Tamper Input Detects System-Level Intrusion
  • Secure Factory Provisioning Service
  • 12-Pin, 3mm x 3mm TDFN Package
  • -40°C to +105°C, 1.62V to 3.63V
  • Low-Power Operation: 100nA (typ) in Standby

ChipDNA is a trademark of Maxim Integrated Products, Inc.
DeepCover is a registered trademark of Maxim Integrated Products, Inc.




MAXQ1065EVKIT Evaluation Kit for the MAXQ1065

The MAXQ1065 evaluation kit (EV kit) provides the hardware and software necessary to exercise th...
  • Demonstrates the Features of the MAXQ1065 Socket Board
  • Compatible with Raspberry Pi® 3 Model B/B+ and Raspberry Pi 2 Model B
  • Compatible with Arduino® UNO Motherboards
  • Provides a USB Connector for USB 2.0-to-SPI Communication
  • Convenient Connectors for Custom Wiring
  • 1.8V and 3.3V Operating Voltage
  • Software Development Kit (SDK) – Available by Request from the MAXQ1065 Webpage

MAXM17626EVKIT Evaluation Kit for the MAXM17625/ MAXM17626 Modules in Application

The MAXM17625/MAXM17626 evaluation kits (EV kits) provide a proven design to evaluate the perfor...
  • Operates up to 5.5V Input Supply
  • MAXM17625 Offers High 92% Efficiency (VIN = 3.3V, VOUT = 1.5V, IOUT = 300mA)
  • MAXM17626 Offers High 94.5% Efficiency (VIN = 5V, VOUT = 3.3V, IOUT = 400mA)
  • Up to 600mA Load Current
  • 2MHz Fixed Switching Frequency for the MAXM17625
  • 4MHz Fixed Switching Frequency for the MAXM17626
  • Selectable Pulse-Width Modulation (PWM) and Pulse-Frequency Modulation (PFM) Modes of Operation
  • Internal 1ms Soft-Start Time
  • Power-Good (PGOOD) Output with Pullup Resistor to Respective Input Voltages
  • Low-Profile, Surface-Mount Components
  • Proven PCB Layout
  • Fully Assembled and Tested

MAXM17626 2.7V to 5.5V, 600mA Himalaya uSLIC Step-Down Power Modules

The Himalaya series of voltage regulator ICs, power modules, and chargers enable cooler, smaller...
  • Easy to Use
    • 2.7V to 5.5V Input
    • Adjustable 0.8V to 3.3V Output
    • ±1% Feedback Accuracy
    • Up to 600mA Output Current
    • Fixed 2MHz or 4MHz Operation
    • 100% Duty-Cycle Operation
    • Internally Compensated
    • All Ceramic Capacitors
  • High Efficiency
    • Selectable PWM- or PFM- Mode of Operation
    • Shutdown Current as low as 0.1μA (typ)
  • Flexible Design
    • Internal Soft-Start and Prebias Startup
    • Open-Drain Power Good Output (PGOOD Pin)
  • Robust Operation
    • Overtemperature Protection
    • -40°C to + 125°C Ambient Operating Temperature/-40°C to +150°C Junction Temperature
  • Rugged
    • Passes Drop, Shock, and Vibration Standards: JESD22-B103, B104, B111

MAXM17625 2.7V to 5.5V, 600mA Himalaya uSLIC Step-Down Power Modules

The Himalaya series of voltage regulator ICs, power modules, and chargers enable cooler, smaller...
  • Easy to Use
    • 2.7V to 5.5V Input
    • Adjustable 0.8V to 3.3V Output
    • ±1% Feedback Accuracy
    • Up to 600mA Output Current
    • Fixed 2MHz or 4MHz Operation
    • 100% Duty-Cycle Operation
    • Internally Compensated
    • All Ceramic Capacitors
  • High Efficiency
    • Selectable PWM- or PFM- Mode of Operation
    • Shutdown Current as low as 0.1μA (typ)
  • Flexible Design
    • Internal Soft-Start and Prebias Startup
    • Open-Drain Power Good Output (PGOOD Pin)
  • Robust Operation
    • Overtemperature Protection
    • -40°C to + 125°C Ambient Operating Temperature/-40°C to +150°C Junction Temperature
  • Rugged
    • Passes Drop, Shock, and Vibration Standards: JESD22-B103, B104, B111

MAX17693B 4.2V–60V, 1.5W, No-Opto Isolated Flyback Converter with Integrated FET

Maxim's Rainier family of isolated power devices enable cooler, smaller, and simpler power-suppl...
  • Reduces External Components and Total Cost
    • Eliminates the Optocoupler and Secondary-Side Error Amplifier
    • Up to 20% Space Savings
    • 76V, Low RDSON Integrated nMOSFET
    • Internal Loop Compensation (MAX17693A)
    • Built-In Soft-Start  
  • Reduces Power Dissipation
    • Delivers up to 1.4W Output Power
    • Frequency Fold-Back Enables Enhanced Light-Load Efficiency
    • 2.5µA Shutdown Current 
  • Supports Key System-Level Design Requirements
    • Frequency Dithering Supports Low-EMI, Spread-Spectrum Operation
    • Switching Frequency Synchronization to External Clock
  • Operates Reliably in Adverse Environments
    • Output Diode Forward Voltage Temperature Compensation
    • Hiccup Current-Limit Protection
    • Programmable EN/UVLO Threshold
    • Input Overvoltage (OVI) Protection (MAX17693A)
    • Overtemperature Protection
    • High Industrial -40°C to +125°C Ambient Operating Temperature Range/ -40°C to +150°C Junction Temperature Range

MAX17693A 4.2V–60V, 1.5W, No-Opto Isolated Flyback Converter with Integrated FET

Maxim's Rainier family of isolated power devices enable cooler, smaller, and simpler power-suppl...
  • Reduces External Components and Total Cost
    • Eliminates the Optocoupler and Secondary-Side Error Amplifier
    • Up to 20% Space Savings
    • 76V, Low RDSON Integrated nMOSFET
    • Internal Loop Compensation (MAX17693A)
    • Built-In Soft-Start  
  • Reduces Power Dissipation
    • Delivers up to 1.4W Output Power
    • Frequency Fold-Back Enables Enhanced Light-Load Efficiency
    • 2.5µA Shutdown Current 
  • Supports Key System-Level Design Requirements
    • Frequency Dithering Supports Low-EMI, Spread-Spectrum Operation
    • Switching Frequency Synchronization to External Clock
  • Operates Reliably in Adverse Environments
    • Output Diode Forward Voltage Temperature Compensation
    • Hiccup Current-Limit Protection
    • Programmable EN/UVLO Threshold
    • Input Overvoltage (OVI) Protection (MAX17693A)
    • Overtemperature Protection
    • High Industrial -40°C to +125°C Ambient Operating Temperature Range/ -40°C to +150°C Junction Temperature Range

MAX17693BEVKIT Evaluation Kit for the MAX17693B in 5V Output-Voltage Application

The MAX17693B evaluation kit (EV kit) provides a proven design to evaluate the performance of th...
  • 18V to 36V Input Range
  • Isolated Output: 5V/0.25A DC
  • Compact Design with High Frequency (150kHz) Switching
  • 88% Peak Efficiency
  • Resistor Programmable Input Enable/UVLO Protection
  • External Loop Compensation with Design Flexibility
  • 20ms Soft-Start Time
  • Temperature Compensated Output Voltage Over -40°C to +125°C Operating Temperature
  • Provision to External Clock Synchronization and Frequency Dithering
  • VCC Overdrive to Improve Efficiency
  • Minimum Number of External Components
  • Proven PCB Layout
  • Fully Assembled and Tested

MAX17693AEVKIT Evaluation Kit for the MAX17693A in 5V Output-Voltage Application

The MAX17693A evaluation kit (EV kit) provides a proven design to evaluate the performance of th...
  • 18V to 36V Input Range
  • Isolated Output: 5V/0.25A DC
  • Compact Design with High Frequency (150kHz) Switching
  • 88% Peak Efficiency
  • Resistor Programmable Input Enable/UVLO Protection
  • Resistor Programmable Input Overvoltage Protection
  • Internal Loop Compensation Reduce External Components
  • 20ms Soft-Start Time
  • Temperature Compensated Output Voltage Over -40°C to +125°C Operating Temperature
  • Provision to External Clock Synchronization and Frequency Dithering
  • VCC Overdrive to Improve Efficiency
  • Minimum Number of External Components
  • Proven PCB Layout
  • Fully Assembled and Tested

MAX25308 Two/Three Output Low Noise LDO Linear Regulators

The MAX25307/MAX25308 are a two/three output linear regulator family that deliver up to 600mA on...
  • 1.7V to 5.5V Input Voltage Range
  • Factory Selectable Output Voltage of 0.6V to 3.7875V in 12.5mV Steps
  • 37µVRMS Output Noise, 10Hz to 100kHz
  • 1.95mA (Max) Operating Supply Current
  • 70dB PSRR at 10kHz
  • 600mA Maximum Output Current (OUT1)
  • 300mA Maximum Output Current (OUT2/3)
  • ±1.25% DC Accuracy Over Load, Line, and Temperature
  • 155mV (Max) Dropout at IMAX1/2/3 Load (3.3VIN)
  • < 1µA Shutdown Supply Current
  • Overcurrent and Overtemperature Protection
  • Output-to-Input Reversed Current Protection
  • Individual Active-Low RESET Outputs
  • 3mm x 3mm 16 pin TQFN Package
  • -40°C to 125°C Grade 1 Automotive Temperature Range

MAX25307 Two/Three Output Low Noise LDO Linear Regulators

The MAX25307/MAX25308 are a two/three output linear regulator family that deliver up to 600mA on...
  • 1.7V to 5.5V Input Voltage Range
  • Factory Selectable Output Voltage of 0.6V to 3.7875V in 12.5mV Steps
  • 37µVRMS Output Noise, 10Hz to 100kHz
  • 1.95mA (Max) Operating Supply Current
  • 70dB PSRR at 10kHz
  • 600mA Maximum Output Current (OUT1)
  • 300mA Maximum Output Current (OUT2/3)
  • ±1.25% DC Accuracy Over Load, Line, and Temperature
  • 155mV (Max) Dropout at IMAX1/2/3 Load (3.3VIN)
  • < 1µA Shutdown Supply Current
  • Overcurrent and Overtemperature Protection
  • Output-to-Input Reversed Current Protection
  • Individual Active-Low RESET Outputs
  • 3mm x 3mm 16 pin TQFN Package
  • -40°C to 125°C Grade 1 Automotive Temperature Range

MAX25308EVKIT Evaluation Kit for the MAX25308

The MAX25308 EV kit is a fully assembled and tested PCB intended to demonstrate the capability o...
  • 1.7V to 5.5V Input Voltage Range
  • Factory-Selectable Output Voltage of 0.6V to 3.7875V in 12.5mV Steps
  • 1.95mA (Max) Operating Supply Current
  • 70dB PSRR at 10kHz
  • 600mA Maximum Output Current (OUT1)
  • 300mA Maximum Output Current (OUT2/3)
  • ±1.25% DC Accuracy Over Load, Line, and Temperature

MAX40213 Transimpedance Amplifiers with Selectable Gain and Input Current Clamp

The MAX40213 is a transimpedance amplifier for optical distance measurement receivers in LiDAR a...
  • Optimized for CIN = 0.25pF to 5pF
  • Bandwidth = 300MHz (typ)
  • 1.1pA/√Hz Input-Referred Noise
  • Two Pin-Selectable Transimpedance Values (RL = 1kΩ)
    • 150kΩ
    • 750kΩ
  • Internal Clamp for Input Current up to 2A (Transient)
  • Fast Overload Recovery: 25ns at 100mA
  • Offset Input ​Provides Offset Adjust Feature
  • SD Input Shuts Down Internal Circuitry
  • 3.3V Operation
  • 1.75mm x 1.24mm, 8-Bump WLP

MAX22203 65V, 3.8A Dual Brushed or Single Stepper Motor Driver with Integrated Current Sense

The MAX22203 is a dual 65V, 3.8AMAX H-Bridge with PWM inputs and accurate Current Drive Regulati...
  • Two H-Bridges with 65V Maximum Operating Voltage
    • Total RON (High-Side + Low-Side): 300mΩ typical (TA = 25°C)
  • Current Ratings Per H-Bridge (Typical at 25°C):
    • IMAX = 3.8A (Impulsive Current for Driving Capacitive Loads)
    • ITRIP_MAX = 3A (Maximum Current Setting for Internal Current Drive Regulation)
    • IRMS = 2ARMS
  • Integrated Current Drive Regulation (CDR)
    • Internal Current Sensing (ICS) Eliminates External Bulky Resistors and Improves Efficiency
    • Current Drive Regulation Monitor Output Pins (CDRA and CDRB)
    • Multiple Decay Modes (Slow, Mixed, Fast)
    • Fixed Off Time Configurable with External Resistance.
  • Current-Sense Output (Current Monitor)
  • Fault Indicator Pin ( Actove-Low FAULT)
  • Protections
    • Overcurrent Protection for Each Individual Channel (OCP)
    • Undervoltage Lockout (UVLO)
    • Thermal Shutdown (TSD) TJ = +165°C
  • TQFN38 5mm x 7mm package (TSSOP38 4.4mm x 9.7mm available in the future)

MAX22203EVKIT Evaluation Kit for the MAX22203

The MAX22203 evaluation kit (EV kit) provides a proven design to evaluate the +65V, 3.8A Dual H-...
  • Easy Evaluation of the MAX22203
  • Adjustable tOFF Time Using an On-Board Potentiometer
  • Configurable Current Drive Regulation (CDR)
  • On-board +3.3V Regulator to Drive MAX22203 Logic Inputs
  • Test Points and Headers to Interface with MAX22203 Logic Inputs and Current-Sense Outputs
  • Fully Assembled and Tested
  • Proven PCB Layout

MAX22532 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC

The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
  • Enable Robust Detection of Multichannel Analog/Binary Inputs
    • Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
    • Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
    • 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
    • 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
    • Group II CTI Package Material
  • Reduces BOM and Board Space Through High Integration
    • Field-Side Self-Powered with Integrated DC-DC Supply
    • 12-bit, 20ksps Per-Channel ADC
    • Programmable Threshold Comparators for each Channel
    • Isolation for both Data and DC-DC Supply
    • Integrated 1.8V Reference
  • Increase System “Up Time” and Simplifies System Design & Maintenance
    • Field-Side ADC Functionality Diagnostics
    • Field-Side Continuous Power Monitoring
    • Communication System Self-Diagnostics
  • Flexible Control and Interface
    • Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
    • Comparator Output (COUT_) Pins for Fastest Response
    • SPI Interface with CRC Option
    • Precision Internal Reference ±1% (typ)
    • -40°C to +125°C Operating Temperature Range

MAX22531EVKIT Evaluation Kit for the MAX22530/MAX22531

The MAX2253x evaluation kit (EV kit) provides the hardware and software necessary to evaluate th...
  • Easy Evaluation of MAX22530/MAX22531
  • EV kit is USB Powered, No Field -Side Supply Required
  • All Input Accessible
  • Windows 7, Windows 8.1, and Windows 10- Compatible Software
  • Proven PCB Layout
  • Fully Assembled and Tested
  • RoHS Compliant

MAX22531 Field-Side Self-Powered, 4-Channel, 12-bit, Isolated ADC

The MAX22530–MAX22532 are galvanically isolated, 4-channel, multiplexed, 12-bit, analog-to-digit...
  • Enable Robust Detection of Multichannel Analog/Binary Inputs
    • Withstands 3.5kVRMS Isolation for 60s (VISO) for the SSOP Package
    • Withstands 5kVRMS Isolation for 60s (VISO) for the Wide SOIC Package
    • 5.5mm of Creepage and Clearance for 20-pin or 28-pin SSOP Package
    • 8mm of Creepage and Clearance for 16-pin Wide SOIC Package
    • Group II CTI Package Material
  • Reduces BOM and Board Space Through High Integration
    • Field-Side Self-Powered with Integrated DC-DC Supply
    • 12-bit, 20ksps Per-Channel ADC
    • Programmable Threshold Comparators for each Channel
    • Isolation for both Data and DC-DC Supply
    • Integrated 1.8V Reference
  • Increase System “Up Time” and Simplifies System Design & Maintenance
    • Field-Side ADC Functionality Diagnostics
    • Field-Side Continuous Power Monitoring
    • Communication System Self-Diagnostics
  • Flexible Control and Interface
    • Programmable Upper and Lower Input Threshold Enable Programmable Hysteresis
    • Comparator Output (COUT_) Pins for Fastest Response
    • SPI Interface with CRC Option
    • Precision Internal Reference ±1% (typ)
    • -40°C to +125°C Operating Temperature Range

MAX22530EVKIT Evaluation Kit for the MAX22530/MAX22531

The MAX2253x evaluation kit (EV kit) provides the hardware and software necessary to evaluate th...
  • Easy Evaluation of MAX22530/MAX22531
  • EV kit is USB Powered, No Field -Side Supply Required
  • All Input Accessible
  • Windows 7, Windows 8.1, and Windows 10- Compatible Software
  • Proven PCB Layout
  • Fully Assembled and Tested
  • RoHS Compliant

Technical Documentaion

*必填

Technical Documentaion

技术文档

显示 10 / 返回顶部 100 结果 查看全部 结果

器件号 标题 文件类型 日期