Metering and Energy Measurement
MAX78615+LMU

MAX78615+LMU

Isolated Energy Measurement Processor for Load Monitoring Units

Industry's Smallest Form Factor Solution Available for Embedded AC Measurement


Description

The MAX78615+LMU is an isolated energy measurement processor (EMP) for load monitoring and control of any 2-wire single-phase or 3-wire split-phase (120/180°) AC circuit. It provides flexible sensor configuration of up to two MAX78700 (four analog inputs) and numerous host interface options for easy integration into any system architecture.

The internal 24-bit processor and field upgradeable firmware performs all the necessary signal processing, compensation, and data formatting for accurate real-time measurement. Energy accumulation, alarm monitoring, and fault detection schemes minimize the overhead requirements of the host interface and/or network. The integrated flash memory also provides for nonvolatile storage of input configurations and calibration coefficients.
MAX78615+LMU MAX78615+LMU Enlarge++

Key Features

  • Utilizes MAX78700 Isolated Data Converter(s) and Resistive Sensors
  • Flexible SPI, I²C, or UART Interface Options with Configurable I/O Pins for Alarm Signaling, Address Pins, or User Control
  • Nonvolatile Storage of Calibration and Configuration Parameters
  • Small 24‐TQFN Package and Reduced Bill of Materials
  • Internal or External Oscillator Timing References
  • Quick Calibration Routines Minimize Manufacturing (System) Cost

Applications/Uses

  • Building Automation Systems (Commercial, Industrial)
  • Grid-Friendly Appliances and Smart Plugs
  • Inverters and Renewable Energy Systems
  • Level 1 and 2 EV Charging Systems
Part Number SoC Type VSUPPLY
(V)
Total Sensor Inputs Internal Flash
(KBytes)
Internal RAM
(KBytes)
Slave Host Interface(s)
MAX78615+LMU  Energy Measurement 3.3 4 8 1.5
I2C
SPI
UART
See All Energy Measurement SoCs (9)

Pricing Notes:

This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

 

Related Resources


MAX71637
Energy Measurement SoCs

  • Multicore Design: ARM Cortex-M3 Application Core Operating at Up to 108MHz, Plus MAXQ30 32-Bit Core with Single-Cycle Hardware Multiply Operating at 36MHz, Plus a Compute Engine for DSP Functions
  • Watt-Hour Accuracy of 0.1% at Up to 5,000:1 Dynamic Range
  • Sample Frequency Configurable; ΣΔ Sample Rate Configurable Up to 9.83MHz

MAX71617
Energy Measurement SoCs

  • Multicore Design: ARM Cortex-M3 Application Core Operating at Up to 108MHz, Plus MAXQ30 32-Bit Core with Single-Cycle Hardware Multiply Operating at 36MHz, Plus a Compute Engine for DSP Functions
  • Watt-Hour Accuracy of 0.1% at Up to 5,000:1 Dynamic Range
  • Sample Frequency Configurable; ΣΔ Sample Rate Configurable Up to 9.83MHz

MAX35101
Time-to-Digital Converter with Analog Front-End

  • Early Edge Detect Ultrasonic Time-of-Flight
  • Temperature Measurement
  • Event Timing Mode

MAX71071, MAX71071H
Dual-Channel Isolated Metrology ADCs

  • 0.1% Accuracy Over 2000:1 Current Range
  • Exceeds IEC 62053/ANSI C12.20 Standards
  • Compatible with Shunt Resistors as Low as 50µΩ

MAX71071, MAX71071H
Dual-Channel Isolated Metrology ADCs

  • 0.1% Accuracy Over 2000:1 Current Range
  • Exceeds IEC 62053/ANSI C12.20 Standards
  • Compatible with Shunt Resistors as Low as 50µΩ