MAX7058

315MHz/390MHz Dual-Frequency ASK Transmitter

Transmit 315MHz/390MHz with One Crystal While Keeping Your Antenna Matched


Description

The MAX7058 UHF transmitter alternatively transmits ASK/OOK data at 315MHz or 390MHz using a single crystal. The MAX7058 has internal tuning capacitors at the output of the power amplifier that can be programmed for matching to the antenna or load. The MAX7058 can transmit at a data rate up to 100kbps NRZ (50kbps Manchester coded). Typical transmitted power into a 50Ω load is +10dBm. The MAX7058 operates from +2.1V to +3.6V and draws under 8.0mA of current. The standby current is less than 1µA at room temperature. A 15MHz crystal is used as the reference for 315MHz and 390MHz operation by selecting synthesizer-divide ratios of 21 and 26, respectively.

The MAX7058 is available in a 4mm × 4mm, 24-pin thin QFN package and is specified to operate in the –40°C to +125°C automotive temperature range.
MAX7058: Functional Block Diagram MAX7058: Functional Block Diagram Enlarge+

Key Features

  • Switched 315MHz/390MHz Carrier Frequency Using One Crystal
  • +2.1V to +3.6V Single-Supply Operation
  • ASK/OOK Modulation
  • Internal Switched Capacitors for Optimum Dual-Frequency Operation
  • 8.0mA DC Current Drain (50% Duty Cycle OOK)
  • 0.8µA Standby Current
  • Small 4mm x 4mm, 24-Pin Thin QFN Package

Applications/Uses

  • Garage Door Openers
  • Home Automation
  • RF Remote Controls
  • Security Systems
  • Wireless Sensors
Part Number Solutions Applications Band/ Freq.
(MHz)
Features Footprint
(mm x mm)
Budgetary
Price
See Notes
MAX7058  300 to 450MHz-ISM RKE
Automotive
Garage Door Openers
Home Automation
ISM
ISM (Europe)
RF Remote Controls
RKE
Security Systems
TPM
300 to 450
+2.1V to +3.6V Single-Supply Operation
ASK/OOK Modulation
Switched 315MHz/390MHz Carrier Frequency Using One Crystal
4.0 x 4.0 $1.20 @1k
See All ISM RF Transmitters (13)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.


MAX7058EVKIT: Evaluation Kit for the MAX7058
 

Related Resources


MAX3519
DOCSIS 3.0 Upstream Amplifier

  • Exceeds DOCSIS 3.0 Electrical Requirements
  • Low-Power Standby Mode Reduces Static Power Consumption
  • Industry-Standard +5V Single-Supply Operation Simplifies Design and Reduces System Cost

MAX66300
DeepCover Secure Authenticator with SHA-256 and RFID Reader

  • Secure, Contactless Host Authenticator
  • Design Flexibility Supports Diverse Applications
  • Scalable 13.56MHz Analog Front-End Provides Support for Multiple Antenna Configurations

MAX2871
23.5MHz to 6000MHz Fractional/Integer-N Synthesizer/VCO

  • Output Binary Buffers/Dividers Enable Extended Frequency Range
  • High-Performance Phase Frequency Detector (PFD) and Reference Frequency Reduces Spectral Noise
  • Low Normalized Inband Phase Noise of -230dBc/Hz Reduces System Noise Floor Contribution

SC1869
Adaptive RF Power Amplifier Linearizer

  • RFin/RFout PA Linearizer SoC in Standard CMOS
  • Fully Adaptive Compensation
  • Low Power Consumption:

SC1889
Adaptive RF Power Amplifier Linearizer with Dual RMS Power Measurement Unit

  • SC1889 (PC = 00): RFPAL
  • SC1889 (PC = 11): RFPAL + PMU (Optional)

SC1894
225MHz to 3800MHz RF Power Amplifier Linearizer (RFPAL)

  • RFin/RFout PA Linearizer SoC in Standard CMOS
  • External Reference Clock Support:
  • Low Power Consumption:

MAX2153
22kHz Startup Receiver and 3D Transponder

  • Maximizes Battery Life
  • Maximizes Communication Range
  • Extends Cockpit Design Options