DS1624

Digital Thermometer and Memory


Description

The DS1624 consists of two separate functional units: 1) a 256-byte nonvolatile E2 memory and 2) a direct-to-digital temperature sensor.

The nonvolatile memory is made up of 256 bytes of E2 memory. This memory can be used to store any type of information the user wishes. These memory locations are accessed through the 2-wire serial bus.

The direct-to-digital temperature sensor allows the DS1624 to measure the ambient temperature and report the temperature in a 12-bit word with 0.0625°C resolution. The temperature sensor and its related registers are accessed through the 2-wire serial interface. Figure 1 in the full data sheet shows a block diagram of the DS1624.

DS1624: Functional Block Diagram DS1624: Functional Block Diagram Enlarge+

Key Features

  • Temperature measurements require no external components
  • Measures temperatures from -55°C to +125°C in 0.0625°C increments
  • Temperature is read as a 12-bit value (two byte transfer)
  • Converts temperature to digital word in 200ms (max)
  • 256 bytes of E2 memory on board for storing information such as frequency compensation coefficients
  • Data is read from/written via a 2-wire serial interface (open drain I/O lines)
  • 8-pin DIP or SOIC packages
Part Number Sensor Type Functions Interface Accuracy
(±°C)
Parasite Pwr. Temp. Resolution
(bits)
Multi Droppable Oper. Temp.
(°C)
Budgetary
Price
See Notes
DS1624  Local Memory 2-Wire/I2C/SMBus 0.5 No 12 Yes -55 to +125 $3.86 @1k
See All Temperature Sensors (111)
Pricing Notes:
This pricing is BUDGETARY, for comparing similar parts. Prices are in U.S. dollars and subject to change. Quantity pricing may vary substantially and international prices may differ due to local duties, taxes, fees, and exchange rates. For volume-specific and version-specific prices and delivery, please see the price and availability page or contact an authorized distributor.

 

Related Resources


MAX30100
Pulse Oximeter and Heart-Rate Sensor IC for Wearable Health

  • Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design
  • Ultra-Low-Power Operation Increases Battery Life for Wearable Devices
  • Advanced Functionality Improves Measurement Performance

MAX14826
IO-Link Device Transceiver

  • IO-Link Specification v.1.0 and v.1.1 Physical Layer Compliant
  • High Configurability and Integration Reduce SKU’s
  • Integrated Protection Enables Robust Solutions
  • Extensive Fault-Monitoring and Reporting
  • Reverse-Polarity and Short-Circuit Protection on All 24V Inputs/Outputs

  • MAX21001
    Ultra-Accurate, Automotive, 3-Axis Digital Output Gyroscope

    • Minimum Overall Footprint
    • High Accuracy and Stability
    • High Flexibility

    MAX31760
    Precision Fan-Speed Controller with Nonvolatile Lookup Table

    • Customizable 48-Byte Lookup Table (LUT)-Based Architecture Enables a Smooth Nonlinear Control Output that Reduces Acoustic Noise
    • Operating Settings Stored in Nonvolatile Memory for Automatic Operation at Power-On
    • Two Tachometer Inputs Provide Flexibility by Measuring the Speeds of Two Fans Independently

    MAX14934
    Four-Channel, 5kVRMS Digital Isolators

    • Robust Galvanic Isolation of Digital Signals
    • Interfaces Directly with Most Micros and FPGAs
    • Many Options Support Broad Applications

    MAX14935
    Four-Channel, 5kVRMS Digital Isolators

    • Robust Galvanic Isolation of Digital Signals
    • Interfaces Directly with Most Micros and FPGAs
    • Many Options Support Broad Applications

    MAX14936
    Four-Channel, 5kVRMS Digital Isolators

    • Robust Galvanic Isolation of Digital Signals
    • Interfaces Directly with Most Micros and FPGAs
    • Many Options Support Broad Applications