|
|
Application Notes
Over 2000 application notes and technical articles written by engineers, for engineers.You can comment on any application note and contribute to the engineering community.These articles offer experienced analysis, design ideas, reference designs, and tutorials—to make you an expert.
Wireless and RF
| View |
In New Window |
PDF 316.1kB
|
Application Note 5339
Abstract
Designing a Digital Satellite Equipment Control (DiSEqC)-Compatible Phantom Antenna Power-Supply System
|
| View |
In New Window |
PDF 102.1kB
|
Tutorial 5432
Abstract
Measure a Voltage Standing Wave Ratio (VSWR) to Quantify Transmission Line Imperfections
|
| View |
In New Window |
PDF 85.7kB
|
Application Note 5315
Abstract
Determining the Half-IF Spurious Requirement for an LTE Receiver and Choosing the Appropriate RF Mixer
|
| View |
In New Window |
PDF 1.5MB
|
Reference Schematic 5044
Abstract
Low-EMI, Active-Clamped Forward, Class 4 Powered Device (PD) Provides High-Efficiency Solution for PoE Applications
|
| View |
In New Window |
PDF 628kB
|
Reference Schematic 5043
Abstract
Active-Clamped Forward, Dual-Output PD Provides High-Performance Solution for PoE Applications
|
| View |
In New Window |
PDF 23kB
|
Application Note 4286
Abstract
Providing Additional Low-Frequency Rejection with the MAX2659 GSP Low-Noise Amplifier (LNA)
|
| View |
In New Window |
PDF 55kB
|
Application Note 887
Abstract
REP032: Lumped Element Output Match for the MAX2240 Nonlinear 2.45GHz Power Amplifier (PA)
|
| View |
In New Window |
PDF 132kB
|
Application Note 635
Abstract
QuickChip Design Example 1 - A Silicon Bipolar Broadband PLL Building Block Integrated Circuit
|
| View |
In New Window |
PDF 58kB
|
Application Note 276
Abstract
The MAX2269 Power Amplifier for the Japanese CDMA Cellular Band with the PIN Diode Switch
|
400MHz ISM
| View |
In New Window |
PDF 48kB
|
Application Note 1017
Abstract
How to Choose a Quartz Crystal Oscillator for the MAX1470 Superheterodyne Receiver
|
802.11a/b/g Wireless LAN
868/900MHz ISM
| View |
In New Window |
PDF 48kB
|
Application Note 1017
Abstract
How to Choose a Quartz Crystal Oscillator for the MAX1470 Superheterodyne Receiver
|
| View |
In New Window |
PDF 132kB
|
Application Note 635
Abstract
QuickChip Design Example 1 - A Silicon Bipolar Broadband PLL Building Block Integrated Circuit
|
| View |
In New Window |
PDF 85.7kB
|
Application Note 5315
Abstract
Determining the Half-IF Spurious Requirement for an LTE Receiver and Choosing the Appropriate RF Mixer
|
| View |
In New Window |
PDF 1.5MB
|
Reference Schematic 5044
Abstract
Low-EMI, Active-Clamped Forward, Class 4 Powered Device (PD) Provides High-Efficiency Solution for PoE Applications
|
| View |
In New Window |
PDF 628kB
|
Reference Schematic 5043
Abstract
Active-Clamped Forward, Dual-Output PD Provides High-Performance Solution for PoE Applications
|
| View |
In New Window |
PDF 74kB
|
Application Note 3062
Abstract
Dynamic Performance Requirements for High-Performance ADCs and RF Components in Digital Receiver Applications
|
| View |
In New Window |
PDF 45kB
|
Application Note 2371
Abstract
Consider Overall Cascaded Performance When Comparing Integrated RF Frequency
Mixers to Passive Mixer Solutions
|
| View |
In New Window |
PDF 91kB
|
Application Note 2021
Abstract
Specifications and Measurement of Local Oscillator Noise in Integrated Circuit Base Station Mixers
|
| View |
In New Window |
PDF 131kB
|
Application Note 1917
Abstract
Simplifying Tomorrow's LO Drive Designs with the MAX9987-90 Family of LO Buffers/Splitters
|
Broadband Wireless Access
| View |
In New Window |
PDF 628kB
|
Reference Schematic 5043
Abstract
Active-Clamped Forward, Dual-Output PD Provides High-Performance Solution for PoE Applications
|
| View |
In New Window |
PDF 132kB
|
Application Note 635
Abstract
QuickChip Design Example 1 - A Silicon Bipolar Broadband PLL Building Block Integrated Circuit
|
| View |
In New Window |
PDF 69kB
|
Application Note 282
Abstract
MAX2721 Direct-Frequency Upconverter Minimizes Chip Count and Is Ideal for Wideband Application
|
Cable Modems and CATV Systems
| View |
In New Window |
PDF 85kB
|
Application Note 4259
Abstract
MAX2165 Single-Loop AGC Control Solution for the Chinese Terrestrial TV Standard GB20600
|
Cellular Handsets
| View |
In New Window |
PDF 49kB
|
Application Note 4044
Abstract
Tuning the MAX2640 Low-Noise Amplifier (LNA) for a 470MHz to 770MHz ISDB-T Application
|
| View |
In New Window |
PDF 154kB
|
Application Note 3380
Abstract
Effective IM2 Products Estimation for Two-Tone and W-CDMA Modulated Blockers in 3GPP Direct Conversion Receivers
|
| View |
In New Window |
PDF 44kB
|
Application Note 2865
Abstract
Apply Three IF Filters with the MAX2308 IF Receiver IC in Tri-band Wireless Handsets
|
| View |
In New Window |
PDF 131kB
|
Application Note 1917
Abstract
Simplifying Tomorrow's LO Drive Designs with the MAX9987-90 Family of LO Buffers/Splitters
|
| View |
In New Window |
|
Application Note 1185
Abstract
Designing with the MAX2538 Family of Single- and Multi-Band LNAs and Downconverters
|
| View |
In New Window |
PDF 38kB
|
Reference Schematic 443
Abstract
REP008: Dual-Band Front-End IC Tuned for CDMA, PCS, and AMPS at a Common 85MHz Low IF
|
| View |
In New Window |
PDF 58kB
|
Application Note 276
Abstract
The MAX2269 Power Amplifier for the Japanese CDMA Cellular Band with the PIN Diode Switch
|
Cordless Phones
GPS Solutions
| View |
In New Window |
PDF 23kB
|
Application Note 4286
Abstract
Providing Additional Low-Frequency Rejection with the MAX2659 GSP Low-Noise Amplifier (LNA)
|
| View |
In New Window |
PDF 44kB
|
Application Note 2865
Abstract
Apply Three IF Filters with the MAX2308 IF Receiver IC in Tri-band Wireless Handsets
|
Other Applications/Selector Guides/Software/Tutorials
| View |
In New Window |
PDF 316.1kB
|
Application Note 5339
Abstract
Designing a Digital Satellite Equipment Control (DiSEqC)-Compatible Phantom Antenna Power-Supply System
|
| View |
In New Window |
PDF 102kB
|
Application Note 1995
Abstract
Using Spread Spectrum Oscillators to Reduce Radiated Emissions in Consumer Products
|
Remote Keyless Entry/400MHz-ISM
| View |
In New Window |
PDF 48kB
|
Application Note 1017
Abstract
How to Choose a Quartz Crystal Oscillator for the MAX1470 Superheterodyne Receiver
|
| View |
In New Window |
PDF 57kB
|
Application Note 1018
Abstract
How to Modify an Existing Design from a TDA5200 or TDA5201 to a MAX1470 Superheterodyne Receiver
|
Satellite TV and Radio
| View |
In New Window |
PDF 49kB
|
Application Note 4044
Abstract
Tuning the MAX2640 Low-Noise Amplifier (LNA) for a 470MHz to 770MHz ISDB-T Application
|
| View |
In New Window |
PDF 132kB
|
Application Note 635
Abstract
QuickChip Design Example 1 - A Silicon Bipolar Broadband PLL Building Block Integrated Circuit
|
Also see: Product Guides
Keep Me Informed
Preview new application notes in your areas of interest as soon as they are published. Subscribe to EE-Mail™ - Application Notes for weekly updates.
|